Laboratory in Numbers

Built for bigger challenges.

Specialised facilities.
Expanded testing capabilities.

3,212 m²
Usable area
€12 M
Investment
432 kW
Bidirectional DC system power
18,000 L
Walk-in climatic chamber capacity
74 kN
Nominal vibration system force
1,500 VDC
Maximum DC system voltage

The figures represent nominal equipment capacities and are subject to specific testing conditions and configurations.

IEP · 45 years

45 years of
engineering
the future.

Celebrating IEP’s journey and looking ahead to the next chapter. Discover our institutional film.

Institutional film English audio

Areas of expertise

Testing capabilities
for industry
challenges.

Explore seven complementary areas of expertise. Find the testing capabilities that fit your product.

Talk to a specialist

Technical availability, applicable methods and testing conditions are assessed for each project.

Electromagnetic Compatibility (EMC)

Conducted and radiated electromagnetic emission and immunity testing for industrial, commercial and residential electrical and electronic equipment.

Our new facilities expand our testing capabilities to accommodate larger equipment and high-power applications.

Industrial, Commercial and Residential EMC CISPR IEC 61000 Product Standards
Discuss testing requirements

Automotive EMC and Electric Mobility

Testing capabilities for electrical and electronic components and systems used in vehicles, including converters, inverters, on-board chargers, battery management systems and power electronics.

CISPR 25 ISO 11452 UNECE R10 OEM Specifications, subject to technical validation
Discuss testing requirements

Electric Bicycles and Micromobility

Electromagnetic compatibility testing for electrically power-assisted cycles (EPACs/e-bikes), including the possibility of testing complete bicycles under operating conditions using a dynamometer.

EN 15194 Motors Controllers Electronic Systems
Discuss testing requirements

Energy and Power Electronics

Testing and characterisation of AC/DC and DC/DC converters, photovoltaic inverters, electric vehicle chargers, UPS systems and energy conversion equipment.

Bidirectional and regenerative systems enable the simulation of power supply and operating conditions across different applications.

Energy Conversion High Power Grid Simulation AC/DC
Discuss testing requirements

Batteries and Battery Energy Storage Systems (BESS)

Electrical characterisation and performance assessment of battery cells, modules, packs and selected energy storage subsystems.

Testing capabilities focused on charge and discharge cycles, ageing, electrochemical impedance spectroscopy (EIS) and environmental qualification.

Batteries BESS EIS Performance Ageing
Discuss testing requirements

Environmental, Climatic and Mechanical Testing

Assessment of the behaviour of equipment and components exposed to demanding environmental and mechanical conditions.

Temperature, humidity, vibration and shock testing, as well as combined temperature and vibration testing, including applications involving large equipment.

Climatic Testing Vibration Shock Environmental Qualification
Discuss testing requirements

Electrical Safety and Conformity Assessment

Electrical safety testing for industrial equipment, household appliances, luminaires, medical electrical equipment, measuring instruments, electrical switchboards and other electrical and electronic products.

Electrical Safety Functional Testing Pre-compliance Conformity Assessment
Discuss testing requirements

Why choose IEP?

An integrated approach
to product validation.

We bring together different testing disciplines within a single laboratory, facilitating coordination across the various stages of development and assessment of electrical and electronic equipment.

Multidisciplinary expertise

Electrical safety, EMC, power electronics, batteries and environmental testing.

Specialised facilities

Testing capabilities designed for large equipment and high-power applications.

Technical support

Development of testing programmes tailored to the characteristics and requirements of each product.

Experience and reliability

Laboratory with tests accredited by IPAC in accordance with NP EN ISO/IEC 17025, under accreditation number L0027.

Product development support

Diagnostic and pre-compliance testing to help identify potential issues before final conformity assessment.

L0027 NP EN ISO/IEC 17025

Accreditation applies to tests included in the current accredited scope. Confirm the status of each test in your proposal.

    Hidden fields

    Contact us

    Your next project
    starts with a
    technical assessment.

    Are you developing a new product? Do you need to assess its performance, verify compliance with applicable standards or prepare equipment for market entry?

    Share your project details with us. Our team will assess your testing requirements and technical feasibility, identifying the most suitable solutions.

    Tell us about your project.

    Fields marked with * are required.

    LAB & RESEARCH CENTRE
    Testing: EMC, Safety and Energy
    Since its inception, IEP has always worked closely with industry in general, and with the electrical and electronics industries in particular, helping them add greater value and innovation to their products and services.
    The IEP Lab & Research Centre integrates IEP’s existing laboratory facilities while also bringing together unique technological capabilities within the Iberian Peninsula.
    Research & Development

    in the fields of electromagnetic compatibility testing, electric mobility, and energy systems

    Electromagnetic Compatibility (EMC)
    Electromagnetic Compatibility (Automotive)
    Safety (Automotive)
    Electrical Safety
    Vibration Combined with Temperature
    Temperature and Humidity Testing
    AC/DC Power Circulation Systems
    Battery IS Characterisation System

    Investigação & Desenvolvimento

    nos domínios dos ensaios de compatibilidade eletromagnética, mobilidade elétrica e sistemas de energia.

    Compatibilidade Eletromagnética (EMC)
    Compatibilidade Eletromagnética (Automotive)
    Segurança (Automotive)
    Segurança Elétrica
    Vibração Combinada com Temperatura
    Ensaios de Temperatura e Humidade
    Sistemas de Circulação de Energia AC/DC
    Sistema de Caraterização IS de Baterias
    Soluções Técnicas

    Energias Renováveis e Mobilidade

    Oferecemos soluções integradas, com uma vasta gama de serviços técnicos, assegurando qualidade e atendimento personalizado.
    ex11
    Contact Us

      Hidden fields
      Get in touch

      or by calling 229 570 000  ☎️

      Frequently asked questions

      Find out more about our testing capabilities and how to start your project.

      What types of testing does the IEP Laboratory perform?

      The Laboratory performs electrical safety, electromagnetic compatibility (EMC), environmental, mechanical and materials testing, as well as functional, diagnostic and pre-compliance testing.

      Our new capabilities expand our services into electric mobility, power electronics, batteries and energy storage systems.

      Is it possible to perform different types of testing on the same product?

      Yes. IEP's integrated service offering enables the development of testing programmes combining different disciplines, such as EMC, electrical safety, performance characterisation, and environmental and mechanical testing, according to each product's requirements.

      Does the laboratory perform pre-compliance testing?

      Yes. Diagnostic and pre-compliance testing allows manufacturers to assess product behaviour during development, identify potential issues and prepare for final conformity assessment.

      What electromagnetic compatibility testing services are available?

      IEP has established expertise in conducted and radiated emission and immunity testing, in accordance with generic and product-specific standards.

      Our new facilities enable the development of additional testing capabilities for high-power equipment and Automotive applications, subject to validation of the applicable methods and testing conditions.

      Does IEP perform EMC testing for Automotive components?

      The laboratory is developing testing capabilities for Automotive electrical and electronic components and systems, including high-voltage applications.

      The planned testing methods cover standards such as CISPR 25 and ISO 11452, as well as requirements associated with UNECE R10, subject to confirmation of technical availability and the applicable scope.

      Does the laboratory perform testing on electric bicycles?

      Our new capabilities include electromagnetic compatibility testing for electrically power-assisted cycles (EPACs/e-bikes), in accordance with EN 15194.

      This includes the possibility of testing complete bicycles under operating conditions using a dynamometer, subject to technical validation.

      What types of power electronics equipment can be tested?

      Our testing capabilities are designed for AC/DC and DC/DC converters, inverters, UPS systems, electric vehicle chargers, power conversion systems (PCS) and other energy conversion equipment.

      Bidirectional systems enable different characterisation programmes and the simulation of operating conditions.

      Does IEP perform testing on batteries and BESS?

      Our new capabilities are designed for electrical characterisation, performance assessment, charge and discharge cycling, ageing and electrochemical impedance spectroscopy (EIS).

      They also cover selected environmental, mechanical and EMC tests on battery cells, modules, packs and energy storage subsystems.

      What environmental and mechanical tests can be performed?

      IEP has expertise in climatic and mechanical testing, including temperature, humidity, vibration, shock and other environmental tests.

      Our new facilities expand these capabilities to accommodate larger equipment and combined temperature and vibration testing.

      Is the IEP Laboratory accredited?

      Yes. The Laboratory is accredited by IPAC in accordance with NP EN ISO/IEC 17025, under accreditation number L0027.

      Accreditation applies to the tests included in the current accredited scope and does not automatically cover all new capabilities.

      The accredited or non-accredited status of each test should be confirmed in the commercial proposal.

      How can I request a quotation?

      You can contact IEP through the website contact form, providing details of the equipment to be tested, its technical specifications, the applicable standards or requirements, and the tests you wish to perform.

      Our team will assess technical feasibility and prepare a suitable proposal.

      What is the expected turnaround time for testing?

      Turnaround times depend on the type and complexity of the tests, equipment availability and the technical resources required.

      The estimated testing schedule will be defined after reviewing your request.